|
Prefabricated build-in element for in-wall toilet cistern, frontal activation,
toilet cistern depth 120mm, installation height 1055mm. Intended for pre-wall or in-wall massive installation.
Toilet cistern can be built in from the minimum of 20 mm to the maximum of 80 mm of depth.
Element consists of:
-
galvanised metal U profile
-
pre-installed toilet cistern with dual flush technique.
If the START – STOP button is installed works with single flush START – STOP technique.
-
Big quantity: 6 or 9 l, factory default setting 9 l
-
Small quantity: 3 – 4.5 l
-
moisture insulation with styrofoam pad installed in toilet cistern
-
two threaded rods with M 12 nuts for fixing toilet with axial distance of 180 or 230 mm
-
build-in protection for box culvert
-
extension Ø 45/40 × 190 mm and discharge hoses Ø 90 × 165 mm
-
Ø 90 mm collar sets
-
fixing material
-
pre-installed angle valve 1/2'' on the right side of the lid
-
without flushing plates
-
factory default settings of toilet cistern is
9 l and is changed only with regulation of discharge valve for
big quantity 6 or 9l, small quantity 3-4,5l is not regulated.
-
fill valve must remain at factory default setting!
Technical
data:
Spare parts:
 |
