Build-in toilet cistern
for suspended toilet, with frontal activation

ident 12602
art. 5-380-200

flushing plates   

Prefabricated build-in element for wall toilet bowl, frontal activation, toilet cistern width 120mm, build-in height 1055mm. Toilet cistern can be build in from the minimum of 15mm to the maximum of 80mm of depth.

Element consists of:

• galvanised metal U profile

• pre-installed toilet cistern with dual flush technique. If the START – STOP button is installed works with single flush START – STOP technique
  *Big quantity: 6 or 9 l, factory default setting 9 l
  *Small quantity: 3 – 4.5 l

• moisture insulation with styrofoam pads installed in toilet cistern

• two threaded rods with M 12 nuts for fixing toilet with axial distance of 180 or 230 mm

• styrofoam protection for box culvert

• PE wall discharge elbow Ø90/110 mm

• extension Ø45/40×190mm and discharge hoses Ø90×165mm

• collar sets

• fixing material

• pre-installed angle valve 1/2'' on the right side of the lid
  

• element does not have flushing plates

• factory default settings of toilet cistern is 9 l and is changed only with regulation of discharge valve for big quantity 6 or 9l, small quantity 3-4,5l is not regulated

• fill valve must remain at factory default setting!

Flushing plates suitable for single or dual flushing START-STOP technique:

• Art. 5-380-040

• Art. 5-380-220

• Art. 5-380-210

Technical data:

Spare parts: